24x48 Tile Calculator for Kitchen

If you have ever run out of tile halfway through a kitchen, you know the expensive part is not the extra box — it is the second trip, the dye-lot mismatch and the half-finished room. This guide for 24x48 in (61x122 cm) tile in an open kitchen-diner with large-format floor tile is built to prevent exactly that. But read the estimate warning first, because it shapes everything that follows: the numbers here are estimates. Tile coverage, box sizes and prices vary by brand, product line and region, and the product label governs. We use typical values from our material data — for example a box of 24x48 in (61x122 cm) tile typically covers about 16 sq ft (1.5 sq m) — and we show the result as a range, so you can order with confidence instead of guessing.

How the calculation works

The calculator needs four inputs, and each one changes the answer. First, the area: length times width, minus anything that will not be tiled, such as the island and range footprints. Measure each wall or floor run separately in feet (and inches converted to decimal feet), then multiply — a room that is 12 ft by 15 ft is 180 sq ft (16.7 sq m) before deductions. Second, the tile size: 24x48 in (61x122 cm) tile typically comes 2 pieces to a box, covering about 16 sq ft per box — that figure comes from our material data and is labelled typical, because the carton label on your exact product is the authority. Third, the waste allowance, which depends on layout: a straight or grid layout typically needs 5–10% extra, a brick or offset layout 10–15%, and a diagonal or herringbone layout 15–20%. Your layout here is straight grid, so the typical waste range for this job is 5–10%. Fourth, the extras the tile itself does not cover: grout and adhesive. Grout typically covers about 10–25 sq ft per lb depending on joint width, and thinset adhesive typically covers about 40–60 sq ft per 50 lb (22.7 kg) bag.

The formula is short: tiles needed = (net area × (1 + waste %)) ÷ coverage per box, rounded up to whole boxes. Always round up — a box cannot be bought in fractions, and a half-box shortfall at the end of a job is the most expensive kind of shortfall. Grout is area ÷ grout coverage per lb, and adhesive is area ÷ thinset coverage per bag, again rounded up. Note what the formula leaves out on purpose: it does not subtract the grout joints themselves, because their area is tiny against the waste allowance, and it does not assume a single coverage rate. If a retailer quotes you one number for coverage, treat it as a starting point and check the carton — the range is the honest figure.

Worked example: an open kitchen-diner with large-format floor tile

Here is the full arithmetic for an open kitchen-diner with large-format floor tile, a 12 ft by 15 ft space (3.7 m by 4.6 m).

Step 1 — gross area. 12 ft × 15 ft = 180 sq ft.

Step 2 — deduct what is not tiled. Subtract 10 sq ft for the island and range footprints. Net area = 180 − 10 = 170 sq ft (15.8 sq m).

Step 3 — add waste for the straight grid layout. At 5% waste: 170 × 1.05 = 178.5 sq ft. At 10% waste: 170 × 1.10 = 187 sq ft. So you need to buy for 178.5–187 sq ft of tile.

Step 4 — convert to boxes. One box of 24x48 in (61x122 cm) tile covers about 16 sq ft. 178.5 ÷ 16 = 11.2 boxes; 187 ÷ 16 = 11.7 boxes. Rounded up, that is 12 boxes — buy 12 boxes to be safe, and keep the receipt for the unopened spares.

Step 5 — pieces, grout and adhesive. In individual tiles that is about 23–24 pieces of 24x48 in (61x122 cm) tile. Grout at the typical 10–25 sq ft per lb covers 6.8–17 lb for 170 sq ft, so buy the next bag size up from the high end and keep a little for repairs. Thinset at 40–60 sq ft per 50 lb bag means 3–5 bags for this area — buy 5 bags if your trowel notch is on the large side or the substrate is uneven.

If your room is bigger, the same steps scale: measure again, deduct again, apply the same waste range, and round up again. A room twice this size needs roughly twice the boxes, but the waste percentage stays tied to the layout, not the room size.

Cost guidance

Costs on this page are ranges, labelled typical retail range — check the current shelf price before budgeting. No single national price is quoted, because tile, grout and adhesive prices vary by brand, product line, region and retailer, and a price that is right in one store can be wrong in the next. The way to budget is to multiply, not to guess: take the box count from the worked example (12 boxes), multiply it by the shelf price per box on the exact product you have chosen, then add grout, adhesive, spacers, a trowel if you do not own one, and sealer if the tile needs it. For this job that means 12 boxes of 24x48 in (61x122 cm) tile plus roughly 17 lb of grout at the top of the range and 5 bags of thinset, each priced from the shelf where you buy them.

Two cost traps catch first-time tilers. The first is ordering the low end of the range and then paying a second delivery charge — or a higher per-box price — for the one box that finishes the job. The second is forgetting the consumables: grout and adhesive together are a meaningful share of a small job's material cost, and a large-format tile job can need a levelling system as well. Compare the total, not the per-box price, and keep one unopened box for future repairs; a matching dye lot is worth far more than the shelf price of that box later. If you are hiring the work out, labour is usually quoted separately per sq ft and varies by region and by the complexity of the layout — a herringbone shower costs more to set than a straight-grid floor of the same area, so get the quote against the same layout you used for the material count.

Step by step: measure, calculate, order

1. Measure twice. Measure the kitchen in feet at the longest and widest points, and measure each alcove, niche and angle separately. Rooms are rarely perfect rectangles — measure every wall, sketch the shape on paper, and note the the island and range footprints so you can deduct it. Convert inches to decimal feet (6 in = 0.5 ft) before multiplying.

2. Choose the tile and the layout. Pick the 24x48 in (61x122 cm) tile first, then the layout: straight grid for the lowest waste (5–10% here), brick or offset for a classic look, diagonal or herringbone only if you accept 15–20% waste. The layout decision belongs before the order, not after delivery.

3. Use the calculator on this page. Enter the net area, the tile size (24x48 in (61x122 cm)), and the waste percentage for your layout. The tool returns a range — 12 boxes for the example above — and you should plan on the high end. Check the carton label against the calculator's assumed 16 sq ft per box; if your box covers less, the box count goes up.

4. Order and check the delivery. Order 12 boxes for the example job, all from the same dye lot, and check the lot numbers on the cartons before the tiler starts. Keep the grout and adhesive dry and within their shelf life, and confirm the grout colour against a cured sample, not the dry powder.

5. Before you start setting tile. Dry-lay one row to check the cuts at the edges, confirm the substrate is flat and clean, and make sure you have spacers, a level, a suitable trowel and a spare box within reach. Cutting the last tile to fit is normal; discovering you are a box short with wet adhesive on the floor is not.

Frequently asked questions

How many boxes of 24x48 in (61x122 cm) tile do I need for a kitchen?

Divide the area you need to cover, including waste, by the coverage per box. For the worked example on this page — 170 sq ft with 5–10% waste — the answer is 12 boxes. The range exists because waste depends on layout and cuts; order the high end and keep an unopened box for repairs.

How much waste should I add for 24x48 in (61x122 cm) tile in a straight grid layout?

Typical waste ranges are 5–10% for a straight or grid layout, 10–15% for brick or offset, and 15–20% for diagonal or herringbone. This job uses a straight grid layout, so 5–10% is the planning range. Small rooms, angled walls and lots of fixtures all push you toward the high end of your layout's range.

How many 24x48 in (61x122 cm) tiles are in a box?

Typically about 2 pieces per box, covering about 16 sq ft — but that is a typical value from our material data, not a promise. The carton label on the exact product you buy governs, and some lines pack fewer large tiles or more small ones. Always confirm the pieces per box and the sq ft per box on the label before you order.

How much grout and adhesive do I need for 170 sq ft?

Grout typically covers about 10–25 sq ft per lb depending on joint width, so 170 sq ft needs about 6.8–17 lb. Thinset adhesive typically covers about 40–60 sq ft per 50 lb bag, so the same area needs about 3–5 bags. Buy the high end of both ranges if your joints are wide or your trowel notch is large.

Can I mix dye lots if I run short of 24x48 in (61x122 cm) tile?

You can, but you should not plan to. Tiles from different dye lots can differ slightly in shade, and the difference is most visible on a floor or a wall in daylight. That is why this guide tells you to buy 12 boxes up front for the example job and keep one spare — a matching spare box is cheaper than retiling a visible patch later.

Should I tile under the kitchen island and appliances?

Tile under the island if it is a fixed island, so the floor height stays consistent and future changes are easier. Under a freestanding range or fridge, tiling is usually worth it for the same reason, but check the appliance height first — tile plus adhesive raises the floor and can trap a fridge under a counter. The worked example above deducts the island and fridge footprints, so add them back if you decide to tile under them.

Related calculators

Results are estimates — verify with the product label. Coverage, pack sizes, yields and prices vary by brand, product line, surface and region; the label on the product you buy governs. Cost figures are typical retail ranges — check the current shelf price before budgeting.